1- |
Ramadan N. Elshaer, Khaled M. Ibrahim, Azza F. Barakat, Ahmed I. Farahat, Reham R. Abbas, “Determination of Phase Transformation for TC21 Ti-Alloy by Dilatometry Method”, Open Journal of Metal, (2019), vol. 9, pp. 1-10. |
2- |
Ramadan N. Elshaer, Khaled M. Ibrahim, Azza F. Barakat, Reham R. Abbas, “Fatigue Performance of Heat Treated TC21 Ti-Alloy”, Open Journal of Metal, vol. 9, (2019), pp. 11-18. |
3- |
M.E. Moussa, H. I. Mohamed, M. A. Waly, G. S. Al-Ganainy, A. B. Ahmed, M. S. Talaat, Comparison study of Sn and Bi addition on microstructure and biodegradation rate of as-cast Mg-4wt% Zn alloy without and with Ca-P coating, J. Alloys Comp., 792 (2019) 1239-1247. |
4- |
El-Bagoury, Nader, Sameh I. Ahmed, Shimaa El-Hadad, Mohammed A. Amin. The Influence of Microstructure on the Passive Layer Chemistry and Corrosion Resistance for Some Titanium-Based Alloys, Materials, 12 (2019) 1233. |
5- |
Nader El-Bagoury, Sameh I. Ahmed, Ola Ahmed Abu Ali, Shimaa El-Hadad, Ahmed M. Fallatah, G. A. M. Mersal, Mohamed M. Ibrahim, Joanna Wysocka, Jacek Ryl, Rabah Boukherroub and Mohammed A. Amin, The Influence of Microstructure on the Passive Layer Chemistry and Corrosion Resistance for Some Titanium-Based Alloys, materials, 12 (8) (2019) 1233-1253. |
6- |
Nader El-Bagoury, Mahmoud Hessien, Mohamed Alsawat, Mohamed Hisham, Abdullah AlAnazi, Nayef Alshanbari, Optimization of Microstructure and Mechanical Properties of Inconel 718 Alloy through Heat Treatment, Metallography, Microstructure and Analysis, 8 (5) (2019) 642-655. |
7- |
Mahmoud Abdel-Salam, Shimaa El-Hadad, Waleed Khalifa, Effects of microstructure and alloy composition on hydroxyapatite precipitation on alkaline treated α/β titanium alloys, Materials Science and Engineering C, 104 (2019)109974. |
8- |
M.E. Moussa, S. El-Hadad, W. Khalifa, Influence of chemical modification by Y2O3 on eutectic Si characteristics and tensile properties of A356 alloy, Transactions of Nonferrous Metals Society of China, 29 (2019) 1365-1374 . |
9- |
El-Hadad, S., Ibrahim, M., Mourad, M. Effect of heat treatment and titanium addition on the microstructure and mechanical properties of cast Fe 31Mn 28 Ni 15 Al 24.5 Ti x high-entropy alloys. Advances in Materials Science and Engineering, (2019) 2157592. |
10- |
Khalifa, W., El-Hadad, S. Ultrasonication Effects on the Microstructure Characteristics of the A380 Die Cast Alloy. Inter Metalcast 13, 865–879 (2019). |
11- |
El-Hadad, S., Ibrahim, M., Mourad, M. et al. Ultrasonic Detection of Microstructure Features in Ti-Alloyed Ductile Iron. Trans Indian Inst Met 72, 2349–2358 (2019). |
12- |
Ahmed, S. El-Hadad, R. Reda & O. Dawood. Microstructure control in functionally graded Al-Si castings, International Journal of Cast Metals Research, 32 (2019) 67-77. |
13- |
Mervat M Ibrahim, Shimaa El-Hadad and Mohamed Mourad, Effect of liquid-solid volume ratios on the interfacial microstructure and mechanical properties of high chromium cast iron and low carbon steel bimetal, Mater. Res. Express, 6 (2019) 1265c2. |
14- |
M. Ramadan, N. Fathy and K. S. Abdel Halim, New Trends and Advances in Bi-Metal Casting Technologies, International journal of ADVANCED AND APPLIED SCIENCES, Vel. 6, 2(2019). |
15- |
M. E. Moussa, S. El-Hadad, “Effect of Y2O3 addition on microstructure and tensile properties of AZ92 magnesium alloy”, in: Proceedings of International Conference & Expo on Materials Science and Engineering, Dubai, UAE, October 2019. |
16- |
M. E. Moussa, “Casting technology and development of magnesium alloys for automotive and biomedical applications", in: Proceedings of XXVII Annual International Scientific and Technical Conference "Foundry production and metallurgy 2019. Belarus " in Zhlobin city, The Republic of Belarus, October 2019. |
17- |
M. E. Moussa, S. El-Hadad, W. Khalifa, “Microstructure modification of Mg-AZ92 alloying using rare earth oxide”, in: Proceedings of International scientific and practical conference"MACHINE BUILDING AND METALWORKING", Mogilev, Belarus, 2019. |
18- |
S. El-Hadad , M. E. Moussa M. Waly, “Influence of alloying elements on the microstructure and electrochemical behaviour of cast Al-Zn sacrificial anodes”, in: Proceedings of International scientific and practical conference"MACHINE BUILDING AND METALWORKING", Mogilev, Belarus , 2019. |
19- |
M. E. Moussa, M. A. Waly, “Review on effect of dynamic solidification on microstructure and mechanical properties of Mg and Al based cast alloys” in: Proceedings of EGYCAST -2019, Egypt (2019). |
20- |
M. E. Moussa, M. A. Waly, M. Amin, “Influence of ultrasonic vibration on grain refinement and modification of the cast structure of the nickel-aluminum-bronze alloy” in: Proceedings of EGYCAST -2019, Egypt (2019). |
21- |
M. E. Moussa, K. M. Ibrahim, “Sand casting defects in ferrous and nonferrous castings and their remedies: a review paper in: Proceedings of EGYCAST -2019, Egypt (2019). |
22- |
M. E. Moussa, S. El- Hadad, “Casting technology and development of Mg and Al based alloys used for sacrificial anodes” in: Proceedings of EGYCAST -2019, Egypt (2019). |
23- |
M. M. Shehata , S. El-Hadad , M. E. Moussa, M El-Shennawy, “Semisolid casting of hypereutectic Al-17% Si alloy (A390) by using cooling slope plate” in: Proceedings of EGYCAST -2019, Egypt (2019). |
24- |
M. M. Shehata , S. El-Hadad , M. E. Moussa, M El-Shennawy, “Effect of pouring temperature on the microstructure and hardness of semisolid hypereutectic Al-17% Si alloy (A390)", in: Proceedings of 2nd international conference on Material Science & Engineering (ICMSE2019), Egypt (2019). |