Projects

National R&D Projects Organization
Local manufacturing of Ni-Ti shape memory alloy for biomedical applications (1-11-2020 to 1-11-2022), STDF project. (P.I. Prof Khaled lbrahim). CMRDI
Development of Cu-Cr-Zr Alloy for Electro-Mechanical Applications, (2019-2020) STDF project. (P.I. Dr. Mervat Ibrahim) CMRDI
Design and fabrication of new low-cost biomaterials for medical and healthcare applications (2012-2014), Egyptian –Japanese program with EHIME university in Japan. (P.I. Dr. Mervat Ibrahim) CMRDI
Production of Special Aluminum -Silicon Spare Parts for Engineering Industries from Primary Resources (2019), STDF project. (P.I. Prof. Waly) CMRDI
National Scientific Network for Modern Casting (NSNMC) (2019), ASRT. (P.I. Prof Nofal) CMRDI
Local manufacturing of sacrificed anode required for different industrial sectors (2019) STDF project. (P.I. Ass. Prof Shimaa El-Hadad) CMRDI
Enhancement of ADI machinability properties (2018), German Egyptian Research Fund GERF. (P.I. Prof. Waly) CMRDI
Deepening of the local manufacturing of spare parts required by companies affiliated to holding Co. for Chemical Industries (2015), ASRT Initiatives. (P.I. Prof. Waly) CMRDI
Development of Local Technology for the Production of Spare Parts used in Flour Grinding Machining (2015), ASRT Initiatives. (P.I. Prof. Waly) CMRDI
Developing a Quality Manual for the Production of Non-Ferrous Castings at the Foundry of Misr Spinning and Weaving Co. Mahalla-El-Kobra (2014), ASRT. (P.I. Prof. WalyI) CMRDI
Diagnosis, Causes and Remedy of Casting Defects in Iron Castings Produced in the Foundry of Misr Spinning and Weaving Co (2014), ASRT. (P.I. Prof. Waly) CMRDI
DProduction of Spare Parts for Agricultural Equipment from Advanced Iron Castings (2013) ASRT. (P.I. Prof Nofal) CMRDI
Introduction of advanced austempered ductile iron (ADI) technologies to the Egyptian industry (2012), German Egyptian Research Fund GERF. (P.I. Prof. Waly) CMRDI
Technology transfer of ADI production to the foundryshop of EGYPTALUM Co. (2012), EGYPTALUM Company. (P.I. Prof Nofal) CMRDI
TComplete production of innovated and value added metallic and plastic medical implant (2011), ASRT. (P.I. Prof Nofal) CMRDI
Derivation technology of Ti- feed stock production for aerospace industries (2009), ASRT. (P.I. Prof Nofal) CMRDI
Optimization of the Machining Parameters of Ti-Alloys and TiMMC for the different Applications (2020-2022), Academy of Scientific Research. (P.I. Ass. Prof Shimaa El-Hadad) CMRDI
Mega Project of Recycling power station Scrap to Locally Produced Spare Parts (2019-2021), STDF project. (P.I. Ass. Prof Shimaa El-Hadad) CMRDI
SFabrication of Sacrificial Anodes by Casting Technology to serve the Different Sectors (2019-2021), STDF project. (P.I. Ass. Prof Shimaa El-Hadad CMRDI
Fabrication and Properties of (Ti/ calcium phosphate compounds) Functionally Graded Dental Implant Under Centrifugal Force (2013-2017), STDF project. (P.I. Ass. Prof Shimaa El-Hadad CMRDI
Production of Spare Parts for Power Stations from Incoloy Alloys (2015-2016) ASRT Initiatives. (P.I. Ass. Prof Shimaa El-Hadad CMRDI
International Collaboration R&D Projects Country
Introduction of Ductile Iron Technology to Egyptian Foundry Industry Using the Vortex Process, together with the Foundry Institute, TNO, the Netherlands, 1983. (P.I. Prof. Adel Nofal). Netherlands
Fracture toughness and wear resistance of austempered cast iron used for automotive industries (2005-2007), Egypt-USA joint project with Tennessee University in USA. (P.I. Prof Khaled lbrahim) USA
Investigation of the Solidification Path of Aluminum Alloys, together with Toulouse University, France, 2008. (P.I. Prof. Adel Nofal). France
Production and characterization of titanium alloys in Egypt (2009 -2011), STDF project, Egypt-Germany joint project with Clausthal University in Germany. (P.I. Prof Khaled lbrahim) Germany
Thermomechanical Processing of Dual-Phase Ductile Iron, together with TU-Clausthal, Germany, 2011. (P.I. Prof. Adel Nofal). Germany
Introduction of Advanced ADI-Technologies to the Industrial Sector of the Egyptian Market, together with Fraunhofer Institute (IWM), Germany, 2011. (P.I. Prof. Adel Nofal). Germany
Production of thin-wall ductile iron, ADI and SiMo castings for automotive industry, with KITECH Institute, South Korea. (P.I. Prof. Adel Nofal). South Korea
Improvement of machinability properties of ADI, together with TU-Clausthal-Germany Germany
Dynamic Solidification of Fe-C alloys. (P.I. Prof. Adel Nofal).
Plastic deformation of ADI together with Physico Technical Institute Belarus
Continuous casting of Nano-modified Cr-bronze alloys together with Institute of Technology of Metals. (P.I. Prof. Adel Nofal). Belarus
Production of thin-wall ductile iron, ADI and SiMo castings for automotive industry, with KITECH Institute, South Korea (2016), Korea – Egyptian research fund, (P.I. Prof. Adel Nofal). South Korea
Optimization of processing and properties of titanium alloys for medical applications (2010), German Egyptian Research Fund GERF. (P.I. Prof. Waly) Germany
Solidification path and structure of semi-solid cast aluminum alloy A356 (2008), IMHOTEP program between Egyptian Academy of Scientific Research & Technology and French Ministry of Foreigner Affairs IMHOTEP. (P.I. Prof. Waly) France
Insitu synthesis and sintering of MoSi2/ zirconia mullite composite for high temperature applications, King Abdulaziz City for Science and Technology (2011-2013) (Prof. Nader El-Bagoury KSA
Study the impact of EHA on the corrosion of CS and SS in the presence of various alpha sablin catalyst components, SABIC Company (2012) (Prof. Nader El-Bagoury) KSA